This makes the measure the “start measure”.
The 2 (REPEAT) button lamp flashes at this time.
3. When playback reaches the last measure of the section you want to repeat, press the 2 (REPEAT) button again.
This makes the measure the “end measure”.
Repeat playback of the specified section starts as soon as you select the end measure.
The 2 (REPEAT) button lamp is lit (not flashing) at this time.
4. Pressing 2 (REPEAT) again returns to normal play.
This will cause the 2 (REPEAT) button lamp to go out.
This starts playback of the song.
6 (PLAY/STOP) button.
1. Press the
2. When playback reaches the first measure of the section you want to repeat, press the 2 (REPEAT) button.
These measures are repeated.
Start
End
Repeating Playback of a Specific Section (Repeat)
You can configure the Digital Piano to repeat the section of a song you want to practice. You could, for example, specify repeat play from measure 5 to measure 8.

Playing Demo Songs

Adjusting the Song Volume

You can use the following procedure to adjust the volume level of the song’s Auto Accompaniment, without affecting the volume of keyboard tone output. For details, see “Song Volume” (page E-41).

Practicing Either Hand’s Part (Part Off)

You can turn off the right hand part*1 or left hand part*2 of a song and play that part on the Digital Piano while the song plays back.

*1 Song data Channel 4 (fixed)

*2 Song data Channel 3 (fixed)

1.

2.

Press the 7 (PART) button.

This causes “L-[ON] R-[ON]” to appear on the display.

Use the bt (w, q) buttons to turn off the part you want.

Press (w) to toggle the left hand part or (q) to toggle the right hand part on and off.

3.

4.

Press the 7 (PART) button again.

This exits the part on/off screen.

Hold down the bl (USER SONGS) button for at least two seconds.

This will assign the same tone as the hand that is turned off to the keyboard.

5. Press the 6 (PLAY/STOP) button to start song playback.

The part you turned off does not sound, so you can play it on the keyboard.

Sounding a Count at the Beginning of a Song

You can configure the Digital Piano to sound a count before playback of a song starts, which helps to get the timing right when you are playing along on the keyboard. For details, see “Pre-count” (page E-42).

E-26