Playing with Different Tones

Layering Two Tones

Use the following procedure to layer two tones, so they sound at the same time.

When specifying two tones for layering, first tone you select will be the main tone, while the second tone will be the layered tone.

1. While holding down the FUNCTION button, press down the keyboard key for the first tone you want to layer and then the key for the second tone.

Example: First press the HARPSICHORD key and

then the ELEC ORGAN 1 key.

HARPSICHORD

ELEC ORGAN 1

2. To unlayer the keyboard, select another tone by pressing the GRAND PIANO button or by using the procedure under “Selecting and Playing a Tone” (page E-8).

NOTE

•You cannot layer the BASS 1 or BASS 2 tone with another tone.

•You cannot perform the layer operation when recording to Track 2.

To adjust the volume balance between two layered tones

1. While holding down the FUNCTION button, use the keyboard keys shown below to adjust the volume of the layered tones.

C1

C2

C3

C4

C5

C6

C7

C8

 

 

Initial default (Center)

 

 

Volume of the layered tone

 

 

Volume of the main tone

(Second tone you selected)

 

 

(First tone you selected)

•To return the volume setting to its initial default, hold down the FUNCTION button and press both of the keys at the same time.

E-10