Assembling the Stand

4. Insert angle brackets H into the gap between the anti-tipping bracket and the side panel.

H

5. From the outside of side panels A and B, temporarily tighten the screws you loosened in step 3, above.

6. Mount pedal unit E onto angle brackets H, which you installed in step 5, above.

E

8. Cover the heads of the F screws with screw caps I.

I

English

9. After adjusting the position (height) of pedal unit E, fully tighten the screws that you temporarily tightened in step 5, above.

10. Mount the piano onto the stand. Position the piano so the dowels on the top edges of side panels A and B enter the dowel holes on the bottom of the piano.

Note that there is nothing anchoring the piano to the stand at this time. Take care to ensure that the piano does not fall off the stand.

7. Use two F screws to secure both ends of the pedal unit E to the angle brackets.

F

E-31