Assembling the Stand

11. Use the screws J to securely fix the brackets

at the top of side panels A and B to the bottom of the piano.

JJ

12. After checking to make sure the six screws that secure side panels A and B are fully tightened, cover the heads of the screws with screw caps D.

D

To connect the cable

1. Making sure that the pedal unit cable plug is oriented as shown in the illustration below, plug it into the pedal connector on the bottom of the digital piano.

Press the plug fully into the connector as far as it will go.

Use the clips G to secure the pedal cable to two locations on side panel B.

G

To install the music stand

1. Slide the music stand under the two bolts on the top of the digital piano as shown in the illustration and then tighten the bolts.

E-32