Getting Ready
Assembling the Stand
Before assembling the stand, first take a few moments to check that all of the items shown below are present.
•This stand does not include any of the tools required for assembly. It is up to you to prepare a large Philips head (+) screwdriver for assembly.
Before starting assembly, check to make sure that you have all the parts shown below. You can find the screws in a plastic bag inside of the polystyrene foam packing material.
B
C
D
AE
F |
| O |
G |
| P |
|
| |
H |
|
|
I |
| Q |
|
| |
J |
|
|
K |
| R |
|
| |
L |
|
|
M(a) | (b) | S |
|
T
N
U
*CAUTION
•Assembly of the stand should be performed by at least two people working together.
•This stand should be assembled on a flat surface.
•Do not remove the tape from the locations shown in the nearby illustration until you finish assembling the stand. Removing the tape before assembly is complete is very dangerous because it allows the keyboard cover to open and close, creating the risk of pinching your fingers between the cover and the Digital Piano.
Tape | Tape |
•Take care that you do not pinch your fingers between parts when assembling them.
•When placing the Digital Piano on the floor, be sure to place it on something soft (a blanket, cushion, etc.). Do not place the Digital Piano directly onto the floor.
1. Unfasten the band that fastens the pedal cord to the back of the pedal unit E and extend the pedal cord.
Pedal cable
A Side panel ........................... | ×1 |
B Side panel ........................... | ×1 |
C Back panel .......................... | ×1 |
D Back panel .......................... | ×1 |
E Pedal unit ............................ | ×1 |
F Screws ................................ | ×8 |
G Screw caps.......................... | ×8 |
H Screws ................................ | ×2 |
I Screws ................................ | ×5 |
J Screws ................................ | ×3 |
K Screws ................................ | ×2 |
L Clips .................................... | ×2 |
Bracket .......................... | ×1 | |
Bracket .......................... | ×1 | |
N Brackets .............................. | ×2 | |
O Screw caps ......................... | ×2 | |
P Joint connectors.................. | ×6 | |
QPolystyrene foam packing material (Required for stand
assembly.)........................... | ×1 |
R Headphones hook............... | ×1 |
S Screw .................................. | ×1 |
T Keyboard cover spacer ....... | ×1 |
U Keyboard spacer hook ........ | ×1 |