Getting Ready

15. Remove the tape from the Digital Piano, and remove the cardboard and polystyrene foam packing materials.

16. Open the keyboard cover and lower the music stand as shown in the illustration below.

Once you lower the music stand, you do not need to raise it again, even when you close the keyboard cover.

Keyboard cover

Music stand

17. Connect the AC adaptor as described under “Power Outlet” (page E-37).

After you connect the AC adaptor, the Digital Piano is ready to play. See page E-4 for information about turning on power and playing.

Using the Keyboard Cover Spacer

*CAUTION

Be sure to use the keyboard cover spacer whenever the cover is closed.

Closing the keyboard cover without using the spacer can cause the cover to deform under its own weight.

1. Whenever you close the keyboard cover, insert the keyboard cover spacer T (page E-32) at the position noted in the nearby illustration.

Note that the keyboard cover spacer is magnetic. Though they are not visible, there are other magnets located in the vicinity of the points marked (A) in the illustration.

(A)

Keyboard cover spacer

NOTE

While using the keyboard, store the spacer on the hook as shown in the illustration below.

Hook

E-36