GETTING ACQUAINTED
•Be sure to turn off power before connecting or disconnect- ing the adaptor.
•Always turn camera power off before disconnecting the AC adaptor, even if the camera has batteries installed. If you don’t, the camera will turn off automatically when you dis- connect the AC adaptor. You also run the risk of damaging the camera whenever you disconnect the AC adaptor with- out first turning power off.
•The AC adaptor may become warm to the touch after ex- tended periods of use. This is normal and is not cause for alarm.
•After using the camera, turn it off and unplug the adaptor from the AC outlet.
•The camera automatically switches over to AC adaptor powered operation whenever the AC adaptor is plugged into the camera.
•Always use the AC adaptor to power the camera whenever it is connected to a computer.
Turning the Camera On and Off
Sliding the POWER ON/OFF switch
to the right toggles camera power on POWER ON/OFF and off.
POWER ON/OFF
Power Save Settings
The settings described below let you specify sleep and auto power off trigger times that help to conserve valuable battery power.
AUTO POWER OFF
Auto Power Off turns off camera power if no operation is performed for five minutes in the PLAY mode. In the REC mode, you can specify an Auto Power Off trigger time of two or five minutes.
SLEEP
The monitor screen enters a sleep state if no operation is performed for a specified amount of time in the REC mode. Pressing any button immediately wakes up the monitor and restores normal operation. You can specify 30 seconds, 1 minute, or 2 minutes before the sleep state is triggered, or you can turn off this setting entirely.