GETTING ACQUAINTED

To power save settings

 

 

• In the PLAY mode, Auto Power Off trigger time is fixed

 

 

 

 

 

 

 

at five minutes.

 

 

 

1.Turn on the camera and slide the REC/PLAY selector to “REC”.

2.Press MENU.

3.Use [+] (down) and [–] (up) to select “FUNC- TION”, and then press the shutter release but- ton.

4.Use [+] (down) and [–] (up) to select the item whose settings you want to change, and then press the shutter release button.

•To make auto power off settings, select “Auto Power Off”.

•To make sleep settings, select “Sleep”.

•Sleep is disabled in the PLAY mode.

•Performing any button operation while the monitor is asleep immediately wakes it up and restores normal operation.

•The Auto Power Off setting is given priority if you have “2 min” set for both Sleep and Auto Power Off. This means that the camera turns off if you do not perform any operation for about two minutes in the REC mode.

•Auto Power Off is automatically disabled when under any one of the following conditions.

—While a slideshow is playing

—When you are performing operations on a com- puter, printer, or other external device connected to the camera’s DIGITAL terminal or USB port.

—While the AC adaptor is connected to the camera

5.On the screen that appears, use [+] and [–] to make the setting you want, and then press the shutter release button.

Auto power off settings: “2 min” “5 min”

Sleep settings: “Off” “30 sec” “1 min” “2 min”

E-38