GETTING ACQUAINTED

Memory Cards

This camera supports use of a CompactFlash memory card (CF TYPE I/II) or IBM microdrive for image storage. Note that all mentions of “memory” card in this manual refer both to a CompactFlash memory card and IBM microdrive, unless specifically noted otherwise.

IMPORTANT!

Make sure that the power of the camera is turned off before you insert or remove a memory card.

When inserting a memory card into the camera, make sure that the card is oriented correctly. Make sure that the correct side of the card is facing up, and that you insert the correct end of the card into the camera.

Inserting a Memory Card into the Camera

1.Open the memory card slot cover.

2.As shown in the illustration, slide the memory card into the slot and push it in as far as it will go.

If the Eject button is extended, press it in before sliding the memory card into the slot.

3.Close the memory card slot cover.

Side marked arrow should face the front side of the camera!

Eject button

Side marked with arrow

Memory card slot cover

E-39