Casio QV-7000SX EDITING IMAGES, To start Auto Play, To turn the screen saver on and off, Recording the Title, Screen Saver, Adding a Title to an Image

PLAYBACK		PLAYBACK

To start Auto Play	5. To stop Auto Play, press any button besides		Setting the Auto Play Interval							Screen Saver
	MENU.		You	can	use the	following	operation	to set the	amount of	The screen saver function automatically activates Auto Play
1.Slide the Function Switch to PLAY.	• Note that all buttons are disabled while an image		You	can	use the	following	operation	to set the	amount of
			time	that should		be allowed	between	each image	during
			time	that should		be allowed	between	each image	during	(which automatically scrolls through images) whenever you
	change is in progress. Wait until an image is stopped		Auto Play (the Auto Play interval).							(which automatically scrolls through images) whenever you
2. Press MENU.	change is in progress. Wait until an image is stopped		Auto Play (the Auto Play interval).							do not perform any operation for about five minutes in the
	on the monitor screen before performing a button op-									do not perform any operation for about five minutes in the
	on the monitor screen before performing a button op-									Playback Mode. This protects the camera’s monitor screen
	eration, or hold down the button until the image stops.									Playback Mode. This protects the camera’s monitor screen
	eration, or hold down the button until the image stops.		1.Start Auto Play using the operation under “To							and the screen of a connected TV against “burn in” of a static
			1.Start Auto Play using the operation under “To
				start Auto Play” on page 77.						image that is left displayed too long.
			2. Press MENU.							IMPORTANT!
				• Be sure		to wait for the im-				• The screen saver is enabled only when the camera is
3. Use [+] and [–] to select					age on the screen to stop						being powered by its optional AC adaptor. If you do
3. Use [+] and [–] to select					before performing any but-						not perform any operation for five minutes under bat-
VIEW, and then press the					ton operation.						tery power, camera power automatically turns off
shutter button.											(Auto Power Off).
										•	The screen saver displays protected images only. The
			3. Use [+] and [–] to set the Auto Play interval								screen saver is disabled if there are no protected im-
			3. Use [+] and [–] to set the Auto Play interval								ages in memory.
				value you want and then press the shutter but-							ages in memory.
				value you want and then press the shutter but-						•	PC Link will not send images between the camera and
				ton.						•	PC Link will not send images between the camera and
				ton.							a personal computer while the screen saver is turned
4. Use [+] and [–] to select AUTO PLAY, and then											a personal computer while the screen saver is turned
4. Use [+] and [–] to select AUTO PLAY, and then				• You can set the Auto Play interval to any value in the							on. Make sure you turn off the screen saver before
press the shutter button.					range of 5 to 30 (seconds).						trying to perform any image transfer operation. Note
				•	After you make the above setting, Auto Play resumes						that the screen saver is turned on when you purchase
				•	After you make the above setting, Auto Play resumes						the camera.
					using the interval you set.						the camera.
					using the interval you set.
	77	78
	77	78

EDITING IMAGES

PLAYBACK

To turn the screen saver on and off

5. Use [+] and [–] to select ON, and then press the

A selection of powerful built-in editing tools helps you to cre-

1.Slide the Function Switch to REC.

shutter button.

ate the effects you want.

2. Align the dial with

Title Recording Mode

1.Slide the Function Switch to PLAY.

• To turn off the screen saver, perform the above proce-

select title recording.

2. Press MENU.

dure and select OFF in step 5.

Adding a Title to an Image

•

The screen

saver activates if you do not perform any

Adding a title to an image is actually a two-step process.

operation

for about five minutes in the Playback

First you record the title into title memory, and then you su-

Mode.

perimpose the title onto the image. Because of this, you

• To stop an ongoing screen saver operation, press the

should prepare the title by printing it out on your computer or

shutter button.

handwriting it on a sheet of paper.

•

When changing between images, the screen saver

3. After composing the title on the monitor

uses the interval that is specified for Auto Play (page

3. Use [+] and [–] to select

78). To change the interval, press MENU while a

screen, press the shutter button about half

SETUP, and then press

screen saver operation is in progress, and then

MATTERHORN

way and hold it there to activate Auto Focus.

the shutter button.

specify the interval time you want.

• When recording a title, make sure the title is within the

frame shown on the monitor screen.

Recording the Title

• You can use [+] and [–] to adjust the exposure of the

title image. See “Exposure compensation” on page 45

IMPORTANT!

for details.

4. Use [+] and [–] to select SCREEN SAVER, and

• There is space for only one title in title memory. Any

then press the shutter button.

title already in memory is automatically deleted when-

ever you record a new title.

• The digital zoom feature cannot be used when record-

ing a title.

To start Auto Play

5. To stop Auto Play, press any button besides

Setting the Auto Play Interval

Screen Saver

MENU.

1.Start Auto Play using the operation under “To

3. Use [+] and [–] to set the Auto Play interval

value you want and then press the shutter but-

ton.

4. Use [+] and [–] to select AUTO PLAY, and then