Casio QV-7000SX SETTING THE CURRENT DATE AND TIME, Initializing Power Save Trigger Times, To set the date and time, To select the date format, 2. Press MENU, 2. Press MENU

			SETTING THE CURRENT DATE AND TIME
		POWER SUPPLY
5. Press the shutter button to cycle through the			Use the following procedures to set the current date and	To set the date and time
available settings until the one you want is on			time, and to select the date format.
the monitor screen.			When you record an image, the time and date the image was	1.Slide the Function Switch to PLAY.
			shot is registered in accordance with data from the camera’s
6. When the settings are the way you want them,			built-in clock. You can even use the TIME STAMP function to	2. Press MENU.
press MENU to exit the setting operation.			“stamp” the date and time inside the image.
Initializing Power Save Trigger Times			IMPORTANT!
			If you do not set the camera's built-in clock to the cur-
Use the following procedure to return SLEEP and AUTO
			rent date and time, all images are recorded with the de-
POWER OFF trigger time settings to their initial factory de-			fault date and time, which probably is not your correct
faults (SLEEP: 1 minute, AUTO POWER OFF: 2 minutes).			current date and time. Be sure to correctly set the clock	3. Use [+] and [–] to select
To initialize power save trigger times			before you use the camera.
				SETUP, and then press
1.Slide the Function Switch to REC.				the shutter button.
2. Align the dial with	.

•Use [+] and [–] to select POWER SAVE, and then press DISP to initialize the power save trigger time settings.

	33		34
		SETTING THE CURRENT DATE AND TIME		SETTING THE CURRENT DATE AND TIME
4. Use [+] and [–] to select		To select the date format		4. Use [+] and [–] to select
DATE, and then press				DATE, and then press
the shutter button.		Example: May 12, 1999		the shutter button.
		You can select any one of the following formats for the above
		date: 1999/5/12, 12/5/1999, 5/12/1999.
5. Use [+] and [–] to select		1.Slide the Function Switch to PLAY.		5. Use [+] and [–] to select
		2. Press MENU.
ADJUST, and then press				STYLE, and then press
the shutter button.				the shutter button.
6. Set the current date and time.				6. Use [+] and [–] to select the date format you
• Use [+] and [–] to select the setting that is highlighted		3. Use [+] and [–] to select		want, and then press the shutter button.
on the monitor screen, and then press the shutter		SETUP, and then press
button to advance to the next setting. Repeat this for		the shutter button.
all of the settings on the monitor screen.
7. After making all the settings on the monitor
screen, press MENU to register them.
		35	36