Casio QV-7000SX CONNECTING TO OTHER EQUIPMENT, • Computer (page 101), To Connect to a Television, (page 100), 2. Press MENU, the shutter button, VIDEO OUT, and then

			CONNECTIONS	CONNECTING TO OTHER EQUIPMENT
				To Connect to a Television		IMPORTANT!
		DIGITAL Terminal		You can playback images in camera memory on the screen		•	A television must have a video input terminal like the
							one shown in the illustration to connect to this camera.
				of a connected television.
						•	Battery capacity (page 29) and other displays that nor-
	Cables	• Computer (page 101)			VIDEO OUT		mally appear on the camera’s monitor screen are also
							displayed on the television screen.
				Accessory video cable	terminal
DIGITAL	The type of cable you					• The monitor screen goes blank as soon as you con-
Terminal	should use depends on						nect the video cable to the camera.
	the type of equipment			TV
	to which you are					Selecting the Video Output Signal Mode
	connecting.
				INPUT		You can select either of two common video output modes:
				AUDIO		NTSC or PAL.
				L R VIDEO
IMPORTANT!		•	QV Color Printer			The video system you should use depends on the country
			(page 100)	VIDEO IN terminal		where you plan to use the output signal. In the United States
• Be sure to turn off both the camera and other equip-						or Japan, for example, you should use NTSC, but in Europe
ment before making any connections.						you need to use PAL.
• Check the documentation that comes with your other				1.Connect one end of the video cable to the cam-		Check with your local video or TV retailer if you are unsure
equipment for information you may need to know						about which video mode you should use in your country.
when making connections.				era and the other end to the television.
• Leaving the same image displayed on a television or				2. Set up the television for video input.
computer display screen for very long periods can
cause the image to be “burned in” on the screen. When				• See the documentation that comes with the television
this happens, a faint after-image	remains on the
				for information about how to do this.
screen, even after you disconnect the camera. To avoid
this, you should not leave the same image displayed on				3. Use the operations under “Playback” on page
such a screen for very long periods.
				67 to playback images on the television screen.
• This camera does not support cable transfer of data
with other CASIO digital cameras.
			97	98
			CONNECTING TO OTHER EQUIPMENT	CONNECTING TO OTHER EQUIPMENT
To Change the Video Output Mode		4. Use [+] and [–] to select		To Connect to a QV Color Printer		1.Connect one end of the cable that comes with
		VIDEO OUT, and then				the QV Color Printer to the camera and the
				You can use a QV Color Printer to produce printouts of your
1.Slide the Function Switch to PLAY.		press the shutter button.				other end to the printer.
				image data.
						2. Slide the camera’s Function Switch to PLAY
2. Press MENU.				Supported Printer Models: DP-300, DP-8000
						and then turn on camera power.
				Data communication cable		3. Perform the QV Color Printer operations re-
		5. Use [+] and [–] to select the video mode you
						quired for printing.
		want to use, and then press the shutter button.				• See the documentation that comes with the QV Color
							Printer for details.
						• Performing a print operation for a movie prints the 4 or
3. Use [+] and [–] to select				DIGITAL COMMUNICATION			16 individual frames that make up the movie.
SETUP, and then press						• Printing a panorama prints the individual images that
the shutter button.							make up the panorama.
				DIGITAL terminal

99 100