GETTING READY
Configuring Power Saving Settings
You can configure the settings described below to conserve battery power.
Auto Power Off : Turns off power if you do not perform any operation for a specified amount of time.
Sleep : Automatically turns off the monitor screen if no operation is performed for a specified amount of time in a recording mode. Performing any button operation causes the monitor screen to turn back on.
1.Align the mode dial with (Snapshot Mode).2.Press MENU.3.Use [] and [] to select the “Set Up” tab.4.Use [] and [] to select the feature whose setting you want to configure, and then press SET.
To configure this feature: Select this setting:
Auto Power Off | Auto Power Off |
SleepSleep
5.Use [] and [] to change the currently se- lected setting, and then press SET.•Available Auto Power Off settings are: 3 min, 5 min, and off.
•Available Sleep settings are: 30 sec, 1 min, 2 min, and off.
•Note that the Sleep feature does not operate in the Play Mode.
•Pressing any button while the camera is in the Sleep state immediately turns the monitor screen back on.
•The Auto Power Off and Sleep features are disabled while the camera is connected to a computer via the USB port.
33