GETTING READY
3.Press [] or [] to select the tab you want, and then press SET to move the selection cursor from the tab to the settings.
NOTE
• The recording mode menu appears if you press the |
MENU button before starting a record operation. It will |
not appear if you press the MENU button during a |
4.Use [] and [] to select the feature whose setting you want to configure, and then press [].
•Instead of pressing [], you could also press SET.
Example: To select the “Size” item.
setup procedure, while the camera is standing by for |
recording of the second image of a Coupling Shot op- |
eration, etc. |
• See “Menu Reference” on page 131 for more information |
about menus. |
5.Use [] and [] to change the currently se- lected setting, and then press SET.
• This applies the setting.
35