BASIC IMAGE RECORDING
Using the Flash
Perform the following steps to select the flash mode you want to use.
1.In a recording mode, press MENU.
2. Press to select the flash mode.
• Each press of | cycles | MF |
|
through the flash mode |
| DPOF |
settings shown below on the | PREVIEW | |
monitor screen. |
|
|
| Flash mode indicator |
To do this: | Select this setting: | |||
Have the flash fire automatically | None | |||
when required (Auto Flash) | ||||
|
|
| ||
|
|
|
| |
Turn off the flash (Flash Off) |
|
|
| |
|
|
| ||
|
|
|
| |
Always fire the flash (Flash On) |
|
|
| |
|
|
| ||
|
|
|
| |
Fire a |
|
|
| |
recording with flash, reducing the |
|
|
| |
chance of |
|
|
| |
eye reduction) |
|
|
| |
Have the flash fire automatically |
|
|
| |
when required |
|
|
| |
|
|
|
|
3.Record the image.
IMPORTANT!
•The flash unit of this camera fires a number of times when you record an image. The initial flashes are pre- flashes, which the camera uses to obtain information that it uses for exposure settings. The final flash is for recording. Make sure that you keep the camera still until the shutter releases.
•Image recording may not be performed if you press the shutter release button while the red operation lamp is flashing.
46