BASIC IMAGE RECORDING

Previewing the Last Image Recorded

Use the following procedure to preview the last image re- corded, without leaving the current recording mode.

1.Press the PREVIEW button to display the last image recorded.

Pressing the PREVIEW button again returns to the re- cording mode.

The PREVIEW button does not perform any operation if you press it immediately after turning on camera power or immediately after entering to the recording mode from the Play mode.

Image preview cannot be used in the Movie Mode. The preview image is cleared automatically whenever the recording mode is changed.

Deleting an Image in a Recording Mode

You can use following procedure to delete the last image you recorded without leaving the current recording mode.

IMPORTANT!

Note that the image delete operation cannot be un- done. Make sure you really do not need an image be- fore you delete it.

1.In a recording mode, press the PREVIEW but- ton to display the last image you recorded.

2.Press .

3.In response to the confirmation message that appears, select “Delete.”

Select “Cancel” to cancel the delete operation without deleting anything.

4.Press SET.

This deletes the image and returns to the recording mode.

42