Casio QV-R40 manual To delete a Best Shot user setup

OTHER RECORDING FUNCTIONS

IMPORTANT!

•Setups that you register as Best Shot sample scenes are located after the built-in sample scenes.

•When a Best Shot user setup is recalled, the monitor screen in step 4 of the procedure on page 74 displays the text “Recall User Scene”.

•Note that formatting the built-in memory (page 128) deletes all Best Shot user setups.

NOTES

•The following are the settings that are included in a Best Shot user setup: focus mode, EV shift value, filter, metering mode, white balance mode, flash intensity, sharpness, saturation, contrast, flash mode, and ISO sensitivity.

•Note that images recorded with this camera only can be used to create a Best Shot user setup.

•You can have up to 999 Best Shot user setups in the camera’s built-in memory at one time.

•You can check the current setup of a scene by displaying the various setting menus.

•User setups are assigned file names using the format “UQR40nnn.jpe” (where n = 0 to 9).

■To delete a Best Shot user setup

1.In the REC mode, press [MENU].

2.Select the “REC” tab, select “REC Mode”, and then press [ ].

3.Use [ ] and [ ] to select “ (Best Shot)”, and then press [SET].

•This enters the Best Shot mode and displays a sample scene.

4.Use [ ] and [ ] to display the user setup you want to delete.

5. Press [ ] ( ) to delete the user setup.

•You can also delete a user setup by using your computer to delete its file in the “SCENE” folder in the camera’s built-in memory (page 146).

76