94
PLAYBACK
Resizing an Image
You can use the following procedure to change a snapshot
image to either SXGA size (1280 x 960 pixels) or VGA size
(640 x 480 pixels).
•VGA is the optimum image size for attachment to e-mail
messages or incorporation into Web pages.
1.

In the PLAY mode, press [MENU].

2.

Select the “PLAY”

tab, select “Resize”,

and then press [왘].

3.

Use [왗] and [왘] to scroll through images and

display the one you want to resize.

IMPORTANT!
•Resizing an image creates a new file that contains
the image in the size you select. The file with the
original image also remains in memory.
•Images smaller than 640 x 480 pixels cannot be
resized.
•Note that you can resize snapshots recorded with
this camera only.
•If the message “This function is not supported for this
file.” appears, it means that the current image cannot
be resized.
•The resize operation cannot be performed if there is
not enough memory to store the resized image.
•When you display a resized image on the camera’s
monitor screen, the date and time that the image was
resized appears on the screen. Note, however, that
the EXIF data* accompanying the resized image is
the data for the original (pre-resize) image.
* EXIF data is information about recording conditions
that is stored along with the image data. See page
154 for more information.
4.

Use [왖] and [왔] to select the setting you

want, and then press [SET].
To do this:
Resize to 1280 x 960 pixels (SXGA)
Resize to 640 x 480 pixels (VGA)
Cancel the resizing operation
Select this:
1280 x 960
640 x 480
Cancel