Press the department key you wish to program
Repeat steps 3 through 5 if you wish to program functions in another departments.
Press okey to complete the program.
Turn the Mode switch to PGM position and select [System Setting] then press Fkey.
Enter 3and press okey to set the register in the programming mode.

Advanced programmings and registrations

Programming functions of departments and PLUs in a lump

There are two methods to set functions of departments or PLUs which are programming at once and programming individual functions.

Programming department functions in a lump

This method programs function of a department at one time.

Step

1

2

3 You can skip this step if you program in departments 01

through 30. If you wish to program in departments 31

DEPT

key.

through 60, press DEPT#SHIFT/

4 Referring following table, input 12- digit program code.

5

6

7

Example:

Programming department 31 as;

•Normal item: D12 = 0.

•D11 through D8 must be 0000.

•US taxable status 1 (a = 1) and 2 (b = 2): D7 = 3 (1 + 2)

Operation

>▪▪▪▪▪>F 3o

DEPT

SHIFT/

DEPT#

BB▪▪▪▪▪BB

[Program code (12 digits)]

!

For example, programming in dept. 26.

o

features Useful

•Allowing zero unit price (a = 1), not allowing negative unit price (b = 0), hash item (c = 4): D6 = 5 (1 + 0 + 4).

•D5 must always be 0.

•Limiting minimum entry digit: 3 digits: D4 = 3.

•As this example is for setting functions in a department, D3 should be 0.

•Applying commission 1 (a = 1), not applying commission 2 (b = 0): D2 = 1 (1 + 0).

•D1 must always be 0.

Press 3o DEPT 00000350301!o

SHIFT/

DEPT#

E-73