Advanced programmings and registrations

Programming functions of departments and PLUs individuallyProgramming functions of departments individually

This part explains programming methods of each function of departments indi- vidually.

Step

1 Turn the Mode switch to PGM position and select [System Setting] then press Fkey.

2 Enter 3and press okey to set the register in the programming mode.

3 Referring the following table, enter two-digit set code you wish to program followed by two 6s. The “66” is the identification code for individual programming of departments and PLUs. Then press okey.

4 You can skip this step if you program in departments 01

through 30. If you wish to program in departments 31

through 60, press DEPT#SHIFT/

key.

DEPT

 

5 Referring the following table, enter program code and press the department key in which you wish to set.

Operation

>▪▪▪▪▪>F 3o

BB66o

(set code)

DEPT

SHIFT/

DEPT#

123#

This example is for linking dept. 03 to item group 123 assuming set code 11 has been

entered in step 3 and DEPT key is not pressed

SHIFT/

DEPT#

in step 4.

6 If you wish to set the same function in another department, press the corresponding dept. key.

$

This example is for setting the same linking group in dept. 04.

7

Repeat steps 4 and 5 to set another function in another

 

8

department.

 

Press okey to complete the program.

o

E-76