Using the General Conversion Mode
Notes
•Any decimal values produced by a calculation result are handled in accord- ance with the decimal value setting you make using the procedure under “To specify decimal value handling”.
•Pressing an arithmetic key (+,
Pressing CAL/CONV in the Conversion Mode immediately after performing a conversion clears the display to zero.
•Pressing CAL/CONV in the Calculator Mode changes to the Conversion Mode with the calculated result ready for conversion.
To change the currency name and rate
Example
To specify an exchange rate of $1 (dollar) = 1.1825 DEM
1.Enter the General Conversion Mode.
2.Use K and L to move the cursor to £ (pounds), and then press FUNC.
3.Press 1 to select SETTINGS.
4. Input “DEM”, and then press SET.
87