About the Display
2 | 3 | 4 | 5 6 | 7 | 8 | 9 |
G r a n d P n o 
19
18
17 | 16 | 15 | 14 | 13 | 12 | 11 10 |
1DSP indicator
Appears when a DSP effect is turned on.
2TONE/RHYTHM indicator
TONE is shown during tone selection and display, while RHYTHM is shown during rhythm selection and display.
3Tone/Rhythm number
Number of currently selected tone or rhythm. The TONE/ RHYTHM indicator shows whether the number is a tone or rhythm. This display area also shows other information when you are using the Pattern Sequencer and Song Sequencer.
4Chord name display
Shows chord names while Auto Accompaniment is being used.
5Tone/Rhythm name
Name of currently selected tone or rhythm. The TONE/ RHYTHM indicator shows whether the name is a tone or rhythm. This area also shows other information in other modes.
6Record indicator
While the Song Sequencer or Pattern Sequencer is turned on, this indicator flashes to indicate record standby and remains on the display without flashing while recording is in progress.
7VOLUME indicator
Appears when you are using the Mixer to change the volume parameter of a specific channel.
8Cursor key indicators
Indicated keys are those that are operational for the function you are currently performing.
9Octave symbol 1
One symbol indicates the note being produced by the keyboard is one octave higher than the note shown in the staff notation area 10. Two symbols indicate two octaves higher.
10Staff notation area
Notes you play on the keyboard, notes played back from mem- ory, chord forms, and received MIDI data* are shown here.
11Octave symbol 2
One symbol indicates the note being produced by the keyboard is one octave lower than the note shown in the staff notation area 10.
12Indicators
An indicator appears to indicate that a function (Layer, Auto Harmonize, Split, General MIDI Mode, Touch Response) is cur- rently in use.
13Beat number
Shows the beat number during rhythm and Auto Accompani- ment play, and while the Song Sequencer or Pattern Sequencer is turned on.
14Measure
Shows the measure number from the start of play during rhythm and Auto Accompaniment play, and while the Song Sequencer or Pattern Sequencer is turned on. In the Mixer Mode, displays the current channel's on/off status.
15Tempo indicator
Shows the tempo as a value indicating the number of beats per minute during rhythm and Auto Accompaniment play, and while the Song Sequencer or Pattern Sequencer is turned on. This display area also shows other information in other modes.
16Metronome
You can turn on the metronome to provide a reference beat for your keyboard play.
17Level meter
The numbers 1 through 16 correspond to Mixer channels. The level meter indicates which channels are on and off, and also indicates the volume level.
18Mixer mode indicator
Indicates the current Mixer mode (Internal, External, External/ Solo, External/Play).
19Graphic keyboard
Notes you play on the keyboard, notes played back from mem- ory, and received MIDI data* are indicated on the graphic key- board.
*Any receive data outside the range of E1 to G7 is not displayed.
Page 10 | 03.7.31, 5:20 PM Adobe PageMaker 6.5J/PPC |