3. Use the number keys or [+] and [–]to specify the user rhythm number where you want to save the pattern, and then press the ENTER button.

•You can input any number in the range of 120 to 129.

No . =1 2 0

4. Press the [￿] or [￿] cursor key to move the cursor to the rhythm name input area, and input a name for the rhythm.

•Use [+] and [–] to scroll through letters at the current cursor location.

•Use the [￿] and [￿] cursor keys to move the cursor left and right.

UER 0 1

5. After you are finished inputting the name, press the ENTER button to save the rhythm pattern under the name you specified.

•The message “Complete” appears on the display for about one second, and then the Pattern Sequencer turns off. The currently selected rhythm at this time is the one you just saved.

•If the rhythm number you specified already contains a rhythm, the message “Replace?” appears when you press ENTER in step 5 above, to ask whether you want to replace the existing rhythm with the new one. Press YES to replace or NO to return to step 1 of the above procedure so you can specify a different rhythm number.

To exit the Pattern Sequencer Mode without saving work area contents

1. Press the PATTERN button.

•This causes the message shown below to appear, which asks if you want to save work area contents.

Sa v�e?

2. Press the NO key.D e l�e t e ?

•The above message asks if you really want to delete work area contents.

3.Press the YES key to exit without saving work area contents, or NO to abort this operation and return to the Pattern Sequencer Mode.

733A-E-059A

E-57

WK-1800/1600(E)-48~57

Page 57

03.7.31, 5:22 PM Adobe PageMaker 6.5J/PPC