1.
• This causes the “Option” disk operation screen to appear on the display. The indicator lamp above the DISK button flashes at this time.
2. Press [￿] three times to display the “Utility” screen.
3. Use [￿] and [￿] to display the “Format” screen, and then press the ENTER button.
• This causes the message “Insert FD” to appear, prompting you to insert the diskette you want to format into the disk drive.
4. Insert the diskette that you want to format into the keyboard’s disk drive, and then press the ENTER but- ton.
• The message “Sure?” appears on the display to confirm whether or not you really want to format the diskette.
5. Press YES to format the diskette or NO to abort the operation.
• The message “Pls Wait” remains on the display while the format operation is being performed.
• After the diskette is formatted, the message “Complete” ap- pears on the display for about one second. Then the key- board returns to step 3 of the above procedure.
❚ NOTES ❚
• To exit the above procedure at any time, press the DISK button so the indicator lamp above it goes out.
• A diskette formatted by MS-DOS or Windows can be used as it is on WK-1800. Diskettes formatted for other types of computers are not com- patible.
E-73
Press the DISK button twice.
To format a floppy diskette
IMPORTANT!
Formatting a diskette that contains data deletes the data. Make sure you no longer need any data that may be on a diskette before you format it.
File Characteristics

Use the following procedures to specify the file characteristics for each type of data during the rhythm data conversion procedure. These steps should be performed for step 9 of the procedure under “Converting Rhythm Pattern Data From Another Keyboard” on page E- 72.

(A) To specify Technics file characteristics1. Use [+] and [–]to specify Bank A, B, or C, and then press ENTER.B a n k =A2. Use [+] and [–]to specify Area 0 or 1, and then press

ENTER.

A r e a = 0(B) To specify Roland file characteristics1. Use [+] and [–]to select either basic (B) or advanced

(A)and the chord type (M, m, 7th). Various combina- tions are available, so scroll through the selections until you find the one you want, and then press EN- TER.

Mo d e =B –M

2. Use [+] and [–]to specify one of the three available conversion processes, and then press ENTER.

P r o c e s = 0To delete a file from a diskette

IMPORTANT!

The file delete operation cannot be undone. Make sure you no longer need a file before you delete it.

1. Insert the diskette that contains the file you want to delete into the keyboard’s disk drive. At this time close the diskette’s write protect tab to enable writing.

2. Press the DISK button twice.

•This causes the “Option” disk operation screen to appear on the display. The indicator lamp above the DISK button flashes at this time.

3.Press [￿] three times to display the “Utility” screen.

4. Use [￿] and [￿] to display the “FileDel” (file delete) screen, and then press the ENTER button.

•This causes a file name to appear on the screen as shown below.

File name

T U N E 1

File name extension

5. Use [+] and [–]to display the name of the file you want to delete, and then press the ENTER button.

•The message “Sure?” appears on the display to confirm whether or not you really want to delete the file.

6.Press YES to delete the file or NO to abort the opera- tion without deleting anything.

•After the file is deleted, the message “Complete” appears on the display for about one second. Then the keyboard returns to step 4 of the above procedure.

❚ NOTES ❚

•To exit the above procedure at any time, press the DISK button so the indicator lamp above it goes out.

•This keyboard cannot delete an SMF from a disk.

733A-E-075A

WK-1800/1600(E)-67~74

Page 73

03.7.31, 5:22 PM Adobe PageMaker 6.5J/PPC