To restore all settings on the YC Camera application setup menu to their initial factory defaults
1.
2. Press the [] key to move the highlighting to “USB” and then press the [ENTER] key.
3. Press the [] key once to move the highlighting to “Setup” and then press the [ENTER] key.
This will display the YC Camera application setup menu.
4.Press the [] key to move the highlighting to “Initialize YC Camera Setup” and then press the [ENTER] key.
This displays the dialog box shown below.
5.
6.
Use the [] key to select “Yes”.
To restore all the settings to their initial defaults, press the [ENTER] key.
To exit the operation without doing anything, press the [ESC] key instead of the [ENTER] key.
7. After you are finished, press the [ESC] key to exit the setup menu.
47