To adjust the camera position
1.
2.
3. Use the [T] key to move the highlighting to “Adjust Camera Position” and then press the [ENTER] key.
z This displays the camera position adjustment dialog box.
4. Point the document camera downwards so the lens is pointed towards the document stage.
z Aim the camera as instructed by the text that appears in the projection area.
z When the document camera is positioned correctly, position adjustment will end and the dialog box will close. At this time the monitor screen (the image being picked up by the document camera) will be projected.
To rotate the currently projected image
1.
2.
Press the [FUNC] key to display the YC Camera application function menu.
Use the [T] key to move the highlighting to “Rotate Right” and then press the [ENTER] key.
z This will rotate the projected image 90 degrees to the right.
zInstead of steps 1 and 2 above, you can also rotate the projected image by pressing the [O] key.
Note
This operation will affect only the image that is currently being projected. The projection image produced the next time you release the shutter will be projected in accordance with the settings on the YC Camera Application Setup Menu (page 48).
46