Projecting an Image File
Use the Viewer Slide Mode to project image files. You can also group image files and project them in a specific sequence as a slideshow.
To project an image file
1. Connect the memory device where the image file you want to project is stored to the Data Projector.
z This will project the main Viewer window. If the main Viewer window does not appear, press the [INPUT] key and select “USB” as the input source.
2. Use the cursor keys to move the highlighting to “Slides” and then press the [ENTER] key.
z This will project a file menu like the one shown below.
z If the image file you want to project is located in a particular folder, use the cursor keys to move the highlighting to that folder and then press the [ENTER] key.
3. Use the cursor keys to move the highlighting to the image file you want to project and then press the [ENTER] key.
z This will project the selected image file.
4. Perform the operations described below as required.
To do this: | Press this key: |
Scroll back to the previous image | [W] |
|
|
Scroll forward to the next image | [X] |
|
|
Rotate the image right 90 degrees | [f] |
|
|
Rotate the image left 90 degrees | [Z] |
|
|
Start a slideshow from the image file | [O] |
|
|
5. To stop image projection and return to the file menu, press the [ESC] key.
26