Input Settings Main Menu

Setting Name

Input

Setting Unit

Description

COMPUTER 1

R C

N Single

Use this sub-menu to specify manually the type of signal being input

Terminal/

 

 

from the projector’s COMPUTER IN 1/COMPUTER IN 2 terminal.

COMPUTER 2

 

 

Auto*:

Terminal

 

 

Automatically detects the signal being input from the

 

 

 

COMPUTER IN 1/COMPUTER IN 2 terminal and configures the

 

 

 

appropriate input protocol.

 

 

 

RGB:

 

 

 

Select this option when a computer is connected to the

 

 

 

COMPUTER IN 1/COMPUTER IN 2 terminal. For details about

 

 

 

connecting a computer, see “Connecting a Computer to the

 

 

 

Projector” in the “Setup Guide”.

 

 

 

Component:

 

 

 

Select this setting when the projector’s COMPUTER IN 1/

 

 

 

COMPUTER IN 2 terminal is connected to the component video

 

 

 

output terminal of a video device using a commercially available

 

 

 

component video cable. For information about connection, see

 

 

 

“Connecting to a Video Device” (page 44).

 

 

 

 

Note

 

 

 

 

 

 

 

 

 

 

 

 

The setting of this item cannot be changed while the projector

 

 

 

 

 

is in the 3D input mode (“3D Input Mode”, page 11) or “On” is

 

 

 

 

 

selected for the “Option Settings 2 J Interactive Pointer”

 

 

 

 

 

setting.

 

 

 

 

 

 

 

Video Signal/

V

N

Single

Use this sub-menu to specify manually the type of signal being input

 

S-video Signal

 

 

 

from the projector’s VIDEO terminal or S-VIDEO terminal.

 

 

 

 

 

Auto*:

 

 

 

 

 

Select this setting to have the projector switch the video signal

 

 

 

 

 

system automatically in accordance with the input signal from the

 

 

 

 

 

video device that is connected to the VIDEO terminal or S-VIDEO

 

 

 

 

 

terminal.

 

 

 

 

 

NTSC / NTSC4.43 / PAL / PAL-M / PAL-N / PAL60 / SECAM:

 

 

 

 

 

Each setting selects the applicable video system. Use these

 

 

 

 

 

settings when you want to specify only one specific video signal

 

 

 

 

 

for the VIDEO terminal or S-VIDEO terminal.

 

 

 

 

 

 

Signal Name

R C V H D U N

Single

Use this sub-menu to specify whether or not the name of the

 

Indicator

 

 

 

currently selected signal source should be displayed in the

 

 

 

 

 

projected image.

 

 

 

 

 

On*:

 

 

 

 

 

Select this option to turn on display of the name of the currently

 

 

 

 

 

selected signal source in the projected image.

 

 

 

 

 

Off:

 

 

 

 

 

Select this option to turn off display of the signal source name.

 

 

 

 

 

 

Restore Menu

R C V H D U N

Source

Use this sub-menu to return all of the sub-menu items on the Input

 

Defaults

 

 

Specific

Settings main menu to their initial default settings.

 

zRestoring menu defaults when there is no input signal will restore defaults for the currently selected input source.

zNote that the “Signal Name Indicator” setting is always returned to its initial default, regardless of the currently selected input source.

34