Wired LAN Settings Main Menu (USB Port Models Only)

Setting Name

Input

Setting Unit

Description

Remote on

R C V H D U N

Single

Specifies whether the projector can be turned on via wired LAN

 

 

 

while the projector is in standby (projector off with power being

 

 

 

supplied).

 

 

 

Enable:

 

 

 

Power on enabled.

 

 

 

Disable*:

 

 

 

Power on disabled.

 

 

 

Important!

 

 

 

 

 

 

 

 

 

 

Performing an “Initialize Network Settings” operation or

 

 

 

 

“Restore All Defaults” operation with the setup menu will

 

 

 

 

cause this setting to change to “Disable”. If you are operating

 

 

 

 

the projector using a wired LAN setting, be sure to change

 

 

 

 

this setting back to “Enable” after initialization.

 

 

 

 

 

 

PJLink

R C V H D U N

Single

Enables and disables PJLink connection authentication.

 

authentication

 

 

Enable*:

 

 

 

 

PJLink connection authentication enabled.

 

 

 

 

Disable:

 

 

 

 

PJLink connection authentication disabled.

 

 

 

 

 

 

Wired LAN info

R C V H D U N

Single

Displays the following information.

 

 

 

 

Projector name:

 

 

 

 

Name currently assigned to the projector.

 

 

 

 

MAC Address:

 

 

 

 

Fixed MAC address assigned to each individual projector.

 

 

 

 

IP Address:

 

 

 

 

Projector’s current IP address.

 

 

 

 

DHCP:

 

 

 

 

Projector’s current DHCP setting status (“Auto” or “Disable”).

 

 

 

 

The projector name, IP address, and DHCP settings can be

 

 

 

 

configured using the projector System Admin page, which can be

 

 

 

 

accessed on a computer connected by LAN to the projector. For

 

 

 

 

details, see the “Wireless Function Guide” on the CD-ROM that

 

 

 

 

comes with the projector.

 

 

 

 

 

 

Initialize

R C V H D U N

Single

Returns all projector network settings (all settings on the System

 

Network

 

 

Admin page) to their initial defaults.

 

Settings

 

 

For detailed information about System Admin page settings, see the

 

 

 

 

“System Admin Page Settings” section in the “Wireless Function

 

 

 

 

Guide” on the CD-ROM that comes with the projector.

 

USB Settings Main Menu (USB Port Models Only)

The USB Settings main menu is available only when there is an external device connected to the USB-A port of the projector. For details, see “USB Function Guide” and “Wireless Function Guide” on the bundled CD-ROM.

38