Getting Ready
Loading Remote Controller Batteries
Important!
zBe sure to use alkaline batteries only.
*RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Caution DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
1.Open the battery cover on the back of the remote controller.
2.Load two new batteries into the case, making sure that their positive (+) and negative
3.Close the battery cover on the back of the remote controller.
Replacing Remote Controller Batteries
Open the battery cover on the back of the remote controller, replace the old batteries with new ones, and then close the battery cover.
Important!
zTo avoid running down the batteries, store the remote control unit so its buttons are not pressed inadvertently.
Setting Up the Projector
Place the projector onto a table, desk, or stand that is level and firm, making sure you allow enough room around it. Best results can be obtained when the projector is pointed directly at the screen, and not at an angle.
Screen | Screen | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
zThe projector can be configured for projection from the back of a screen. For details, see the User’s Guide on the