Starting and Stopping Projection

To start projection

1.Use the bundled AC power cord to plug the projector into a power outlet.

NOTE

zThis product is also designed for IT power distribution system with phase-to-phase voltage 230V.

2.Turn on the computer that is connected to the projector.

3.If the projector lens cover is covering the lens, remove it.

zXJ-H1600/XJ-H1650: Insert your fingers into its recesses and squeeze towards the middle.

zXJ-ST145/XJ-ST155: The lens cover is held on by magnetic force, so simply pull to release it.

4.Press the [P] (Power) key.

zThe first time you turn on the projector, a “Language” window will appear in the center of the projection screen. Select the language you want.

5.Select the input source

zPress the [INPUT] key to display a list of input sources. Use the [T] and [S] keys to select the projector terminal (Computer 1 or Computer 2) where the RGB output from the computer is connected. Finally, press the [ENTER] key.

6.Use the zoom ring of the projector's lens to adjust the size of the projected image (XJ-H1600 and XJ-H1650 only).

7.Use the focus ring to adjust the focus.

NOTE

zThe projector has a keystone correction feature that

prevents distortion of the projected image when projecting from an angle. The projector detects when it is at a vertical angle to the screen and performs keystone correction automatically.

You can use the [KEYSTONE +] and [KEYSTONE –] keys to adjust keystone correction manually.

To turn off the projector

1.Press the [P] (Power) key.

zThis causes the confirmation message to appear. If you do not turn off the projector the confirmation message will disappear automatically after about 10 seconds. The confirmation message will also disappear if you press the [ESC] key.

2.To turn off the projector, press the [P] (Power) key again in response to the confirmation message.

3.After checking to make sure that the POWER/STANDBY indicator has stopped flashing amber and remains lit, unplug the AC power cord from the power outlet.

E-15