Safety Precautions
●Power cord
+ Misuse of the power cord creates the risk of fire and electric shock.
Make sure that you always observe the following precautions.
•Be sure to use only the accessories that come with the projector.
•Make sure that you use a power source with the same voltage as that specified for the projector.
•Do not overload a power outlet with too many devices.
•Do not locate the power cord near a stove.
•Do not use the power cord that comes with the projector with any other device.
•Do not share the outlet supplying power to the projector with other devices. If you are using an extension cord, make sure that the ampere rating of the extension cord is compatible with the power consumption value of this projector.
•Never use the power cord while it is still bundled together.
•Use a conveniently located power outlet that you can reach easily when you need to unplug the projector.
- A damaged power cord creates the risk of fire and electric shock.
Make sure that you always observe the following precautions.
•Never place heavy objects on the power cord and never expose it to heat.
•Make sure the power cord is not pinched between the wall and the rack or table where the projector is located, and never cover the power cord with a cushion or other object.
•Never try to modify the power cord, allow it to become damaged, or subject it to excessive bending.
•Do not twist the power cord or pull on it.
" Never touch the power cord or plug while your hands are wet.
Doing so creates the risk of electric shock.
•When using this projector in the country where you purchased it, be sure to use the power cord that came with it. Whenever using the projector in another country, be sure to purchase and use a power cord that is rated for the voltage of that country. Also make sure that you are aware of the Safety Standards that apply in that country.
-is in a location away from pets and other animals, and unplug the power plug from the power outlet. A power cord damaged
by chewing can cause shorts, and creates the risk of fire.When going out, make sure the projector
●Water and foreign matter
+Watershock.creates the risk of fire and electricNever allow water to get on the projector.
%of water on top of the projector. Water creates the risk of fire and electric shock.
Water or other liquid, or foreign matter
%(metal, etc.) getting into the projector creates the risk of fire and electric shock.
Should anything get inside the projector, immediately perform the following steps.Never place a vase or any other container
1.Turn off the projector.
2.Unplug the projector.
3.Contact your original dealer or authorized CASIO service center.
●Disassembly and modification
!modify it in any way. The projector contains a large number of
not covered by the warranty and are not eligible for repair by CASIO.Never try to take the projector apart or
Be sure to leave all internal inspection, adjustment, and repair up to your original dealer or authorized CASIO service center.
●Dropping and impact
-been damaged by dropping or other mistreatment creates the risk of fire and
electric shock. Immediately perform the following steps.Continued use of the projector after it has
1.Turn off the projector.
2.Unplug the projector.
3.Contact your original dealer or authorized CASIO service center.