Getting Ready
3.Make fine adjustments to the elevation angle of the projector by rotating the front foot.
4.Make fine adjustments to the horizontal tile of the projector by rotating the rear feet
3.
Important!
zTo retract the front foot, hold down the release button and slide the front foot back into the projector. Never try to forcibly change the front foot position without pressing the release button.
Connecting a Computer to the Projector
Connect the projector’s COMPUTER IN terminal to the RGB terminal of a computer as shown in the illustration below.
<Projector> | <Computer> |
COMPUTER IN | Bundled mini |
terminal |
AUDIO IN terminal | To monitor terminal | To line output | |
(analog RGB output terminal) | terminal | ||
|
Audio cable (commercially available)
Important!
zAlways turn off the projector and the computer before connecting them.
zTake care so the volume level of the computer is not set too high.
NOTE
zTo connect to an external input source other than a computer (video device, etc.), see the User’s Guide on the