RSA Lighting Indoor Furnishings specifications Combolight, Catalog # Project Comments Prepared by

DESCRIPTION

An adjustable Multi-lamp Recessed fixture for trimless installation suitable for downlighting and accent applications. Utilizes SIX (6) PAR20 120V lamps.

For remodel applications. Insulation must be kept 3” from all sides and at least 1” above the housing.

SPECIFICATION FEATURES

Catalog #

Project

Comments

Prepared by

Type

Date

A.... Housing

Housing and junction box are aluminum, trimless meshplate is steel with powder coated finish. Perforated meshplate allows for trimless installation in drywall/ plaster ceilings by allowing the ceiling’s mudding compound to be applied right up to the edge of the fixture opening. Includes a beveled “knife-edge” lips to ensure a clean edge. Can accommodate various ceiling thickness.

B.... System Protection:

Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation.

C... Junction Box

Junction Box is UL listed for through branch wiring, 6 #12 90º C supply con- ductors or 60º C for end of run. The fixture is also UL listed as ‘access above ceiling not required’.

D... Electrical

Electrical accessible through ceiling opening. J-Box located on the side wall of the housing behind removable access doors. Electrical components on individually removable “trays” for easy maintenance.

E.... Lamps

Six (6) PAR20 120V lamps mounted in adjustable double gimbal. Lamp holders are removable and may be regressed 1” for additional cut-off. Lamps can accept up to three optical accessories (i.e. lens + hex louver + snoot). 45º x 45º locking lamp adjustment. Beveled-edge lamp ring is secured with threadless, bayonet action. Optional retractable arm is avail- able for lamp pulldown and extreme aim- ing. Includes Med. Base sockets.

F.... Mounting

A mounting frame is provided which inserts into the ceiling opening. The housing is then pushed through the mounting frame and secured with screws through the meshplate.

G... Labels

cULus listed for non-type IC applications, suitable for use in damp locations.

Ceiling Cut-Out: 5.90” x 28.96”

COMBOLIGHT®

Next Generation

Recessed

Multi-Lamp Fixture

Six (6) Light

PAR20 120V

Remodel Housing Trimless

Double
Gimbal
	9.27”	7.45”	30.67”
		Required
		above
45º x 45º		ceiling
	Thermal
Adjust		7.95”
	Protector
	Wiring
	Compartment
	10.96”		40.46”
			28.70”
			27.87”
			4.65”
		4.65”
For use with 20W or 39W PAR20 120V lamps.
ORDERING INFORMATION

C6

R

N

120

N

N

Configuration			Lamp Type / Wattage Label
C6 = COMBOLIGHT			050P20 = 50 Watt max. PAR20 120V
Recessed Six (6) Light
	Housing
	R =	Remodel

Primary Voltage 1 = 120V

Power Supply

N = None - Line Voltage Lamp

Lamp Mechanism

G = Double Gimbal

R = Retractable Double Gimbal

Trim Insert

N = Trimless

Trim Insert Finish

N = Trimless

Housing Interior/Electrical Door/Sleeve Finish

W = White

B = Black

S = Industrial Silver

Specifications and Dimensions subject to change without notice.

rev 022408

www.cooperlighting.com RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031