Setting Name

Input

Setting

Description

Unit

 

 

 

 

 

 

 

Vertical

RCV

Signal

Use this sub-menu to adjust the vertical position of the

Position

 

Specific

input source image within the projection area.

 

 

 

 

Horizontal

RCV

Signal

Use this sub-menu to adjust the horizontal position of the

Position

 

Specific

input source image within the projection area.

 

 

 

 

Frequency

R

Signal

When vertical bands appear in the projected image while

 

 

Specific

RGB is selected as the input source, it means that the

 

 

 

frequency setting is not correct. When this happens, use

 

 

 

this setting to adjust the frequency manually.

 

 

 

Important!

 

 

 

 

 

 

 

 

 

 

If, for some reason, your manual frequency settings

 

 

 

 

cause the image input from the computer to

 

 

 

 

disappear from the projection, you can press the

 

 

 

 

[AUTO] key to perform an auto adjust operation,

 

 

 

 

which should cause the image to appear.

 

 

 

 

 

 

Phase

R

Signal

When there is flickering in the projected image while RGB

 

 

 

Specific

is selected as the input source, it means that the phase

 

 

 

 

setting is not correct. When this happens, use this setting

 

 

 

 

to adjust the phase manually.

 

 

 

 

 

 

Video Mode

V

Source

This setting is valid when VIDEO is selected as the input

 

 

 

Specific

source. Use it to select a mode that is optimized for

 

 

 

 

movies or still images.

 

 

 

 

Normal*:

 

 

 

 

Optimized for movies.

 

 

 

 

Still Image:

 

 

 

 

Optimized for still images. In particular, this setting

 

 

 

 

should be used when projecting still images from a

 

 

 

 

digital camera connected to the projector’s VIDEO

 

 

 

 

terminal.

 

 

 

 

 

 

Restore Menu

RCVU

Source

Use this sub-menu to return all of the sub-menu items on

 

Defaults

 

Specific

the Image Adjustment main menu to their initial default

 

 

 

 

settings.

 

zRestoring menu defaults when there is no input signal will restore defaults for the currently selected input source.

z“Image Adjustment” main menu “Vertical Position”, “Horizontal Position”, “Frequency”, and “Phase” defaults can be restored for the current signal type (XGA/60Hz, SXGA/60Hz,etc.) only.

19