Reattaching the Lens Cover
Use the following procedure to replace the lens cover if it should accidentally become detached from the projector.
1 Insert the nub (3) of the left tab of the lens cover into the depression (1) of the tab under the lens.
zWhen performing the above step, make sure that the lens cover is open to 90 degrees in relation to the front of the Data Projector.
2 Keeping the left nub (3) in the left depression (1), gently press the lens cover towards the right as you insert the nub (4) of the right lens cover tab into the depression (2) of the right tab under the lens.
zDo not apply undue force to the lens cover when performing the above step. Pressing too strongly can damage the tabs of the lens cover.
Press here with a pen or similarly pointed object as you slide the cover into place.
33