4 Place the document whose image you want to project onto the document camera’s document stage.

zBe sure to place the document in the center of the

stage, and do not let any part of the document extend off the edges of the stage.

zWhen placing a landscape orientation document onto the document stage, the top of the page should face

towards the camera stand.

zInitially the monitor image will be projected, and so

the image will appear a bit fuzzy.

zWhen the document camera senses that the document on the stage is not being moved, it will record its image and switch from the fuzzy monitor image to a high-resolution image (recorded image) automatically.

Rough (Monitor) ImageRecorded Image

5 Now you can replace the document currently on the stage with another one. z This will switch to the recorded image of the next document automatically.

Note

Step 5 above is what happens while the Data Projector’s YC Camera application is configured with its initial default settings. The recorded image will not switch automatically if you have changed the “Operation Mode” setting of the YC Camera application to “Manual Capture”. For more information, see “YC Camera Application Setup Menu Contents” on page 57.

49