Starting Projection with Viewer

If the Data Projector is already turned on when you perform the procedure under “Connecting a Memory Device to the Data Projector” (page 19) to connect USB memory to the Data Projector, the main Viewer window shown below will be projected.

Menu Item

Function

Refer to:

Presentation

Enters the Presentation Mode for

“Projecting an ECA File or PtG File” (page 23)

 

projection of ECA or PtG files.

“Converting a PowerPoint File to an ECA File or PtG

 

 

File” (page 14)

 

 

 

Slides

Enters the Slide Mode for projection of

“Projecting an Image File” (page 26)

 

images files.

 

 

 

 

Movie

Enters the Movie Mode for projection

“Projecting a Movie File” (page 28)

 

of movie files.

 

 

 

 

Viewer Setup

Displays the Viewer setup menu.

“Configuring Viewer Settings” (page 34)

 

 

 

Note

If Viewer projection does not start automatically at this time, perform the following steps to select “USB” as the input source.

1. Press the [INPUT] key.

z This displays the input source selection screen.

2. Use the [S] and [T] keys to move the highlighting to “USB” and then press the [ENTER] key.

21