Casio YC-430 PJ 2. , 3. , 4. , Turning the Startup Screen On or Off

173 OTHER SETTINGS
You can configure the camera to display a startup screen of an
image you recorded, whenever you turn it on.
•The startup screen is not displayed when you turn on the
camera by pressing [ ] (PLAY).
1. Press [MENU].
2. On the “Set Up” tab, select “Startup” and then
press [X].
3. Use [W] and [X] to scroll through the images
until the one you want to use as the startup
screen is on the monitor screen.
4. Use [S] and [T] to select the setting you want
and then press [SET].
NOT
E
•The following are the types of images that you can select
for the startup screen.
– Special startup screen images built into the camera
– Snapshots
– Audio snapshots (Audio does not play.)
•Only one startup screen image can be in effect at any time.
To change the startup screen to another image, simply
overwrite the current image with the new one.
•Formatting built-in memory (page 181) will delete the
current startup screen image.
Turning the Startup Screen On or Off
To do this: Select this setting:
Use the selected image as the
startup screen On
Turn off the startup screen Off