Getting Ready

Turning On Power

To turn on the YP-100

1. Connect the projector to the YP-100, referring to “Connecting a Projector” (page E-13).

2. Turn on the projector and/or audio equipment that is connected to the YP-100.

3. Connect the AC adaptor that comes with the YP-100 to the AC adaptor terminal, and plug the AC adaptor into a power outlet.

zThis will cause the YP-100 to turn on automatically.

zThis will cause the YP-100’s [POWER] indicator to light green. Also, the YP-100 logo screen will be projected by the projector if there is nothing connected to the YP-100’s USB port.

zIf this is the first time for you to turn on the YP-100, the dialog box shown below will appear in the center of the projection area. In this case, advance to the next step below.

4. Use the [T] and [S] keys to move the highlighting to the language you want to select and then press the [ENTER] key.

z This will select the language you specified and display the logo screen.

E-14