Getting Ready

To turn off the YP-100

Press the [ ] (Power) key to turn off the YP-100.

zAny changes you make to setup menu* settings are retained when you press the [ ]

(Power) key to turn off the YP-100.

Note, however, that setup menu settings are lost if you unplug the AC adaptor from the YP-100 without first pressing the [ ] (Power) key to turn it off.

*The setup menus include the Viewer setup menu, the Wireless setup menu, and the YC Camera application setup menu. For detailed information about menu settings, see the User’s Guide on the CD-ROM that comes with the YP-100.

Installing YP-100 Software

You will need to install YP-100 software on your computer in order to perform the following operations.

zConvert files created with Microsoft PowerPoint to image (jpg) files and store them on a USB memory device

zProject the contents of the screen of a computer connected to the YP-100 over a wireless

LAN

For more information about installing the software, see the user documentation on the CD-ROM that comes with the YP-100.

Using the Hold Key

Depressing the [ ] (Hold) key on the top of the YP-100 for about one second will cause the [HOLD] indicator to light. Reception of signals from the remote controller by the YP-100 is disabled while the [HOLD] indicator is lit.

Re-enabling Remote Controller Signal Reception

Press the [ ] (Hold) key so the [HOLD] indicator goes out.

z If you press the [ ] (power) key to turn off the YP-100 while the [HOLD] indicator is lit, the [HOLD] indicator will be off (and remote controller signal reception will be enabled) when you turn the YP-100 back on again.

English

E-15