Basic YP-100 Operations

2. Connect the projector to the YP-100, referring to “Connecting a Projector” (page E-13).

3. Use the procedure under “Turning On Power” on page E-14 to turn on the YP-100.

zThis will cause the YP-100’s [POWER] indicator to light green. The YP-100 logo screen also will be projected by the connected projector.

4.Plug the USB memory device you prepared in step 1 into the YP-100’s USB port.

zOnce the YP-100 recognizes the USB memory device, Viewer will start up automatically and a menu of the files contained on the USB Memory Device will appear in the projection area.

5. Use the remote controller’s cursor keys to move the highlighting to the “YP-100” folder and then press the [ENTER] key.

zThis will display a list of image files contained in the folder, arranged in alphabetical sequence on the file names.

6.To start a slideshow of the image files in the “YP-100” folder, press the remote controller’s [] key.

zThis will project the first image file of the folder so it fills the entire projection area.

zTo scroll to the content of the next image file, press the [X] key. To scroll to the content of the previous image file, press the [W] key.

7.To end the slideshow, press the remote controller’s [ESC] key.

E-18