
To establish a wireless LAN connection with Manual Connection 1 between the first computer and the Data Projector
1 On your computer, start up Wireless Connection 2.
z If your computer is running Windows Vista, starting up Wireless Connection 2 will cause the “User Account Control” message to appear. When it does, click “Allow”.
z If the “Select Network” dialog box like the one shown below appears, click the wireless LAN adapter you want to use for connection with the Data Projector and then click the [OK] button.
zIf your computer is running Windows XP or 2000, do not select the “Connect to an existing network” check box. See page 39 for more information about using this check box.
2 Click [Cancel] to close the “Connect” dialog box that appears.
3 On the Wireless Connection 2 window, select [Connection] - [Switch Connection Profile].
zThis will display the Switch Connection Profile dialog box.
4 Click the “Profile Name” down arrow button and then select “Manual Connection 1” from the list that appears.
5 Click the [Connect] button.
6 Wait until the “Connect” dialog box like the one shown below appears.
12