6 Changebutton. the “IP Address” setting to “192.168.50.12” and then click the [Register]
Important!
The Data Projector and each of the computers (1 to 4) that will be connecting to the Data Projector over the wireless LAN all must have different IP addresses.
7 On the confirmation dialog box that appears, click the [OK] button. Next, on the Switch Connection Profile dialog box that appears, click the [Connect] button.
8 Wait until the “Connect” dialog box like the one shown below appears.
zWhen the computer finds the Data Projector, a Connection dialog box like the one shown below will appear.
If there are other Data Projectors with wireless adapters connected in the area, all that are detected will appear in the list.
zIf your computer is running Windows Vista and the “Set Network Location” dialog box appears, click [Cancel] to close it.
16