Advanced Wireless LAN Connection Settings

This section explains how to configure advanced settings for a wireless LAN connection between the Data Projector and a computer.

Web Setup

In order to modify the settings of a Data Projector manual setup profile and to configure advanced settings of other Data Projector settings, you need first to display a special web browser page named “Web Setup” on you computer screen. To display Web Setup, use a web browser running on a computer that is connected to the Data Projector over a wireless LAN.

To display and log into the Web Setup page

1 Establish a wireless LAN connection between a computer and the Data Projector.

z For information about connection procedures, see “Using a Simple Connection Profile for a Wireless LAN Connection between the Data Projector and a Single Computer” (page 9) and “Using a Manual Connection Profile for Wireless LAN Connection between the Data Projector and One or More Computers” (page 11).

z If a wireless LAN connection is already established between the computer and the Data Projector, proceed to step 2.

2 On the Wireless Connection 2 window of the computer, click the button.

z This will start up the computer’s default browser and display an initial page like the one shown below.

zThe Web Setup page may not appear if your browser is running already. In this case,

quit the browser and then click the button again.

20