Subsequent Wireless LAN Connection between the Data Projector and Four Computers
Important!
You can use the following procedure when the following condition exists.
zYou already have performed the procedure under “First Wireless LAN Connection between the Data Projector and Four Computers” (page 11), and that you have not changed the Data Projector and/or computer settings since then.
To establish a wireless LAN connection between four computers and the Data Projector using the same settings as the last connection
1 Turn on the Data Projector and connect the CASIO
zThis will start up Wireless automatically and display the “Standing by for connection...” message on the projection screen.
2 Turn on the first computer and start up Windows.
3 On the first computer, start up Wireless Connection 2.
zWhen the computer finds the Data Projector, a Connection dialog box will appear.
4
zThis will close the Connection dialog box and display the Wireless Connection 2 window.
5 buttons and then click the 
button.
zThis will cause the contents of the computer screen to be projected so they fill the entire projection area.
6 Repeat steps 2 through 5 for all of the other computers.
7 On the Data Projector’s remote controller, press the [ 
] key.
zThis will display the user list screen, which shows thumbnails of the screen contents of each connected computer.
8 On the Data Projector’s remote controller, use the [S], [T], [W] and [X] keys to select one of the thumbnails and then press the [ENTER] or [ 
] key.
zThis will cause the contents of the selected computer screen to be projected so they fill the entire projection area.
19