To switch the Data Projector connection profile
1 On the Data Projector’s remote controller, press the [ ] key.
z This will cause the connection profile menu to appear in the projection area.
The currently selected connection profiled is highlighted.
2 Use the [T] and [S] keys to move the highlighting to the connection profile you want to select and then press the [ENTER] key.
zThis displays the dialog box shown below.
3 Presskey. the [S] key to move the highlighting to “Yes” and then press the [ENTER]
zThis will switch to the Data Projector connection profile you highlighted in step 2 and then display the “Standing by for connection...” message.
This is the display of the connection profile name after switching.
24