To use Web Setup to modify the Data Projector connection profile from a computer

Important!

Performing the procedure below will terminate the current wireless LAN connection between the Data Projector and computer. To re-establish a connection, reconfigure the computer’s wireless LAN settings so they match those of the new Data Projector connection profile.

1 Perform the procedure under “To display and log into the Web Setup page” (page 20) to display the Web Setup top page.

2 Click the “Connection Profile” down arrow button and then select the connection profile you want from the menu that appears.

3 Click the [Switch] button.

z This will display the following message on the Web Setup page.

The connection profile has been changed.

Switch the settings on the computer and then re-connect.

zThis will switch the Data Projector to the connection profile you selected in step 2 and terminate the current wireless LAN connection between Data Projector and computer.

zAt this time, the message “Standing by for connection...” will appear in the projection area, along with the connection profile you switched with “Connection Profile” in step 2 above.

25