8
9
On the Wireless Connection 2 window, click one of the projection area position
buttons and then click the 
button.
zThis will cause the contents of the computer screen to be projected so they fill the entire projection area. At this time the user name assigned to the computer will appear in the upper left corner of the projection area.
zFor information about the computer user name, see “Assigning a User Name to a Computer for Projection” (page 37).
On the Data Projector’s remote controller, press the [ 
] key.
zThis will switch to the user list screen. When the Data Projector is connected to multiple computers, you can use the user list screen to control user whose computer screen image is currently being projected.
zTo exit the user list screen, press the [ENTER] key or [ 
] key on the remote controller.
The projection area position buttons are arranged in the same sequence as the screens on the user list screen.
zTo establish wireless LAN connections between the Data Projector and a second and subsequent computers, perform the procedure under “To establish a wireless LAN connection with Manual Connection 1 between the second and subsequent computers and the Data Projector” below.
14