CX Series Instruction Manual
NOTES
A)Do not remove desiccant pack! There is a desiccant pack attached to the housing base under the board camera that is designed to absorb any moisture trapped inside the housing during adjustment. To avoid excessive moisture buildup, it is recommended that the camera not be installed in rainy or excessively damp conditions. It is also advisable to limit the number of times the housing cover is removed. The desiccant pack can be replaced if condensation develops inside the housing.
B)If the housing cover is opened frequently or if the gasket dries out, apply a light coat of good quality
C)Make sure that the end of the cable, including BNC connector and power connection, are not exposed to the elements. Exposed cable may cause a power short.
FCC RULES: PART 15
This device can be expected to comply with part 15 of the FCC Rules, provided it is assembled in exact accordance with the instructions provided with this kit. Operation is subject to the following conditions: (1) This device may not cause harmful interference; and (2) this device must accept any interference received including interference that may cause undesired operation.
Page 3
